60, Jalan Gaya 1,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8629268
+6078629268
+607-8629268 khprosound88@gmail.com |
Previous | 1 / 4 | Next |
PX10 | ||
100V models | ||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 |
4Ω | 1200W x 2 | |
2Ω | 700W x 2 | |
8Ω/Power Boost Mode | - | |
4Ω/Power Boost Mode | - | |
120V models | ||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 |
4Ω | 1200W x 2 | |
2Ω | 700W x 2 | |
8Ω/Power Boost Mode | - | |
4Ω/Power Boost Mode | - | |
220V-240V models | ||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 |
4Ω | 1200W x 2 | |
2Ω | 700W x 2 | |
8Ω/Power Boost Mode | - | |
4Ω/Power Boost Mode | - | |
General specifications | ||
Sampling frequency rate | Internal | 48kHz |
A/D D/A Converters | AD/DA: 24-bit linear, 128 times over sampling | |
Total harmonic distortion | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | |
Frequency response | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | |
S/N ratio | 101dB (A-weighted, 8Ω, Gain setting = +14dBu) | |
Crosstalk | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | |
Voltage Gain/Sensitivity | 8Ω Volume max | 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu) |
8Ω Volume max /Power Boost mode | - | |
Maximum input voltage | +24dBu | |
Input impedance | 20kΩ (Balance), 10kΩ (Unbalance) | |
I/O Connectors | Speaker output ports | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4' PHONE(TS) x2 |
Line Input | XLR-3-31 x2, 1/4 'PHONE(TRS) x2 | |
Others | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | |
Indicators | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | |
Processors | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | |
Latency | 1.5 msec (Analog Input to Speakers) | |
Presets | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | |
Protection circuit | Load protection | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) |
Amplifier protection | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | |
Power supply protection | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | |
Amplifier class | Class D, Balanced output circuit (BTL) | |
Cooling | 16 step variable speed fan x 2, front to rear airflow | |
Power requirements | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | |
Power consumption | 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) | |
Dimensions | W | 480mm (18-7/8') |
H | 88mm (3-7/16'): 2U | |
D | 388mm (15-2/8') | |
Net weight | 7.4 kg (16.31 lbs) | |
Accessories | USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 | |
Others | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C |