The TA-1121 is a P.A. amplifier specifically designed for commercial applications. It is an ideal solution for bars, restaurants, retail outlets, office building, and other applications where paging and background music are required. It combines a 120 W amplifier with a five inputs mixer; it is a versatile and easy operating paging system. Mono inputs are available on combo balanced XLR /TRS 6.35 mm jacks. A switch on each input selects a line or microphone level with a 24 V phantom power option. A priority mode is attributed to MIC1 input with a mute depth control. An insert out/in is available to connect signal processing devices, like EQs or anti-feedback systems. The output section accepts 70/100 V constant voltage line and 8 Ω impedance loads. The TA-1121 can also operate with a 24 V DC power supply.   MODEL TA-1121 Power (RMS) 120W Frequency Response 80Hz - 15kHz  ± 3 dB (MIC) 40Hz - 18kHz  ± 3 dB (MIC) Power Supply AC:115V ~ 230V 50/60Hz switching - DC: 24V Input / Sensitivity MIC 1~4: (Combo jack) balanced 2mV (-55dB) AUX :       (RCA) Unbalanced 100mV (-18dB) – CD 300mV (-10dB) LINE :      Unbalanced 100mV (-18dB) AMP IN :  (RCA) 0dB / 1V THD <1% S/N ratio MIC 1~4  > 65 dB AUX  > 75 dB AMP IN  > 80 dB Outputs 8Ω - 25 /70 /100V Controls Volume x 5, Bass, Treble, Master Dimension (W x D x H) 430 x 262 x 88 mm (16.9’’ x .10.3’’ x 3.5’’) Weight 10 kg (20.05 lbs)   read more

The EC-380 is an uniquely shaped and high-quality condenser microphone equipped with a electrical chime and designed for paging applications. With its' adjustable chime volume, flexible power option of battery or DC, EC-380 is definitely the choice when selecting the a hassle-free plug and play chime microphone.     Power Source 6V DC (4x ''AA'' batteries) or DC adapter: 9-24V Current Consumption 13 mA during chime and 6 mA microphone operation Microphone Element Condenser Polar Pattern Cardioid Chime Tones 4-Tone Chime (UP/DOWN) Rated Impedance 600 Ω, balanced Output Microphone: -41 dB ±3dB (1 kHz 0 dB=1 V/Pa) Chime Tones: -31 dB ±3dB (maximum position) Frequency Response 50 Hz - 18,000 Hz Output Connector XLR-3-32 equivalent RJ45: Audio Output, Power Supply and Contact Output Operating Temperature 0 °C to +40 °C Finish Stand Mic: ABS resin, black, paint Mic Shaft: Copper alloy, black, paint Dimensions 110 (W) × 145 (L) x 532 (H) mm  Weight 558 g (exclude batteries) Accessory Windscreen x 1, XLR Cable Stereo Phone Plug (7.5m) x 1   read more

The EM-380 is an uniquely shaped and high-quality condenser microphone designed for use in lecture halls, houses of worship and paging applications. This product is equipped with selectable power option between battery or phantom power. The EM-380 is definitely an easy ''plug-and-play'' gooseneck microphone.     Element Condenser Microphone Polar Pattern Cardioid Rated Impedance 750 Ω, balanced Rated Sensitivity -41 dB ±3dB (1 kHz 0 dB=1 V/Pa) Power 3V DC (2x ''AA'' batteries) or Phantom power (9-52V) Frequency Response 50 Hz - 16,000 Hz Output Connector XLR-3-32 equivalent Operating Temperature 0 °C to +40 °C (32 °F to 104 °F) Finish Stand Mic: ABS resin, black, paint Mic Shaft: Copper alloy, black, paint Dimensions 110 (W) × 145 (L) x 532 (H) mm  Weight 550 g (exclude batteries) Accessory Windscreen x 1, XLR to Phone Jack Cable (7.5m) x 1 read more

The TZ Series Column Speakers are highly efficient compact speakers that deliver excellent sound  performance in medium sized venues such as houses of worship, gymnasiums, auditoriums and more.   Enclosure Sealed Type Rated Input 20 W Rated Impedance 100 V line: 500 Ω (20 W), 1 kΩ (10 W), 2 kΩ (5 W), 4 kΩ (2.5 W) 70 V line: 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 4 kΩ (1.3 W) Sensitivity 90 dB (1 W, 1 m) Frequency Response 150 Hz - 16,000 Hz Speaker Component 10 cm cone-type × 2 Input Terminal Push-In terminal Finish Enclosure: HIPS, black, paint Punched Net: Surface-tread steel plate, black, paint Speaker Bracket: Aluminum die-cast, black, paint Joint Bracket, Wall Bracket: Steel plate, t1.6, black, paint Dimensions 135 (W) × 250 (H) × 128 (D) mm Weight 1.9 kg (unit only) Accessory Speaker Bracket x 1, Joint Bracket x 1, Wall Bracket x 1, Fixing Bolt (M5 x 60) x 1, Hexagon Bolt (M6 x 12) (with plain washer and spring washer) x 2, Machine Screw (M5 x 20) (with plain washer and spring washer) x 2, Hexagon Bolt (M8x 15) x 1 Option Speaker Stand: ST-16A read more

The DH-120 features a long horn which permits sounds to easily pass through and is ideal for providing public address information. It is designed to be used in conjunction with 2 driver unit, and has an internal anti-bird net to prevent insects and birds from getting into the unit. Sound Pressure Level 110 dB (1 W, 1 m) * Frequency Response 180 Hz - 6 kHz * Applicable Unit TU-631, TU-651, TU-631M, TU-651M Driver Coupling 1 - 3/8 18 threads (inch screw) read more

The BS-1030B is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030B can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain. Enclosure 2-way bass-reflex type Rated Input 30 W Rated Impedance 8 Ω 100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W) 70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W) Sound Pressure Level 90 dB (1 W, 1 m) Frequency Response 80 Hz - 20 kHz Speaker Component 12 cm cone-type + dome-type Speaker Cord 2-core cabtyre cord with diameter of 6 mm Operating Temperature -10 ℃ to +50 ℃ Water Protection IPX4 (can be installed vertically or horizontally.*) Finish Enclosure: ABS resin, black (RAL9011 GRAPHITE BLACK), paint Net: Surface treated steel plate, black (RAL9011 GRAPHITE BLACK), powder coating Bracket: Surface treated steel plate, black equivalent to RAL9011 GRAPHITE BLACK, powder coating Dimension 196 (W) × 290 (H) × 150 (D) mm (unit only) Weight 2.5 kg (unit only) Accessory Bracket…1, Bracket mounting screw…2, Bracket mounting washer…2 Option Applicable bracket: WCB-13B, SP-410 Applicable stand: ST-16A read more

Integrated with a resin panel and speaker frame, the PC-658R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. Rated Input 6 W (100 V line), 3 W (70 V line) Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) Sensitivity 90 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise) Frequency Response 65 Hz - 18 kHz (peak -20 dB) Speaker Component 16 cm (6'') cone-type Dimensions for Fixing Hole Mounting hole: φ170±5 mm (φ6.69''±0.2'') Ceiling thickness: 5 - 25 mm (0.2'' - 0.98'') Speaker Mounting Method Spring clamp Finish Baffle: Polypropylene resin, white (RAL 9016 equivalent) Grille: Surface-treated steel plate net, white (RAL 9016 equivalent), paint Dimensions φ192 × 73 (D) mm (φ7.56'' × 2.87'') Weight 500 g (1.1 lb) Accessory Paper pattern …1   read more